BUDDYCLUB Spec II

Online Catalogue | BUDDYCLUB EXHAUST | BUDDYCLUB Spec II

Buddy club Spec II

0.8mm Super Light Weight
Spec II is a specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range.


All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe. and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler.


Durability can be seen throughout the construction of the system.


The inner silencer is included with all systems.

Product Choice

BC-SP2-EXEF8 - EF CIVIC 1988-1990 (£400 + VAT)

BC-SP2-EGEK3D - HONDA EG BUDDY CLUB SPECII (£399.00 + VAT)

BC-SP2-S13 - NISSAN S13 BUDDY CLUB SPECII (£375.00 + VAT)

BC-SP2-TEP91 - TOYOTA EP91 STARLET BUDDY CLUB SPECII (£375.00 + VAT)

Quantity:

BC-RSTB12605M/BC-RSTB12610M/BC-RSTB12615M
BUDDY CLUB THERMO HEAT BANDAGE

SPECIFICATION:
· Available in 3 different lengths:
- 5m x 50mm , 10m x 50mm, 15m x 50mm
· Made of special ceramic impregnated fiber material
· Excellent heat insulation and abrasive durability
· Maintains performance under extreme conditions.
· Withstands temperatures is up to 2300º Fahrenheit!
- (some other brands are only designed to withst and up to 1000º F)
· Includes ring clamps for easy and proper installation
· Suitable for all performance vehicle applications

Use this material to keep more heat within the exhaust system and away from other components such as transmissions, oil pans, differentials, etc. Turbocharged applications can use this material to wrap the exhaust manifold to keep a hotter exhaust gas charge for the turbocharger for improved response.
Prices from £39.00 + VAT

THERMAL LENGTH

BC-RSTB126BC - THERMAL BANDAGE 5 METRES

BC-RSTB12605M - THERMAL BANDAGE 10 METRES

BC-RSTB12605M - THERMAL BANDAGE 15 METRES

Quantity:

BC-ARSOSJ-001

Catalytic converters create a substantial obstruction in the exhaust flow of all modern production vehicles. Removing it is a good way to create a freer flowing exhaust and increase horsepower.

The problem then could be that it usually prompts the engine control unit (ECU) to activate an annoying check engine light. The ECU checks for the presence of the catalytic converter through one of the vehicle's oxygen (O2) sensors. The Buddy club O2 Sensor Simulator unconditionally produces an accurate sine wave signal similar to that of an O2 sensor if the catalytic converter were there, while dissipating the current allotted for the sensor's heater element. By using this simulator, you will avoid the check engine management light altogether.

Units are pre-set, they match any zirconia O2 sensor signal. They're coated with protective polyurethane and come ready to be hardwired into the O2 sensor's wiring harness.

These O2 simulators are universal and will work on 2, 3 and 4 wire O2 setups.

We insist on using a qualified Auto Electrician to fit these o2 Sensors.
Buddy club will not be held responsible for and damage or problems cause during its installation.

Price: £55.00 / €62.70 (£66.00 / €75.24 Including VAT at 20%)
Quantity:

Buddyclub Spec II

Spec II is a specially designed system for competition use only. Its simple straight thru design creates an increase of exhaust gas velocity in order to improve efficiency. The middle silencer (resonator) on the main pipe is designed to maintain torque in the low to mid speed range. All mufflers are made with SUS304 stainless steel, 1mm is used for main pipe. and the ultra 0.8mm is used for main silencer. This combination creates a super light weight muffler. Durability can be seen throughout the construction of the system. The inner silencer is included with all systems.

Online Catalogue | BUDDYCLUB EXHAUST | BUDDYCLUB Spec II

Product Sections

Store Information

BUDDYCLUB Spec II

Buddyclub Spec II